Structural Adhesive products from HDHT are designed to provide a very high-strength join between two surfaces with the resulting bond often being as strong as the surfaces they join.
Our Structural Adhesive products are based on epoxy, acrylic or polyurethane, are able to cure at room temperature.
As they could be dispensed using a handheld or air-powered dispenser, they are quick and easy to use, ensuring accurate mixing and no wastage.
Our structural adhesive products achieve permanent, high-strength bonds with many materials including metals, glass, ceramics, wood, plastics and rubbers. 。

- Two-component acrylic adhesive, green / red
- Fast cure
- Thixotropic formulation, does not flow on vertical surface
- High tensile strength
- Excellent impact resistance

- Transparent two-component epoxy, self-mixed, transparent
- 5mins curing, water, heat, anti-aging, acid
- Good electrical insulating properties
- High tensile strength and tear strength
- Excellent impact resistance
- Suitable for bonding metal, ceramics, etc.

- Two-component acrylic adhesive, blue / red
- Fast curing, not drawing
- With good impact resistance
- High tensile and shear strength
- Suitable for bonding metals, ceramics, plastics and rubber, etc.

- Does not contain solvents and toxic substances, white/grey
- Operating time 10mins, low shrinkage
--1: 1 mixing ratio, ease of operation
- High-strength adhesive sealing
- For bonding metal, wood, ceramics, FRP, resin, marble etc.

- Does not contain solvents and toxic substances, transparent / yellow
- Operating time 5mins, low shrinkage
--1: 1 mixing ratio, ease of operation
- High-strength adhesive sealing
- For bonding metal, wood, ceramics, FRP, resin, marble etc.

 - Two-component polyurethane structural adhesive, black, flame retardant
- Operating time 3mins, fast-curing, one hour to work
- After curing has good toughness and wear resistance
- Have a higher cohesive, tensile, peel strength and elongation at break
- Suitable for bonding rubber, metal, stone, fabric etc.

 - Two-component polyurethane structural adhesive, black, flame retardant
- Operating time 3mins, fast-curing, one hour to work
- After curing has good toughness and wear resistance
- Have a higher cohesive, tensile, peel strength and elongation at break
- Suitable for bonding rubber, metal, stone, fabric etc.

- For the joint bonding of high temperature and ordinary rubber conveyor belt
- High temperature, water resistance,
- Applicable to all kinds of rubber, canvas core, nylon core, polyester core, etc.
- Fast curing, 1-4 hours can be put into use

10653050 - 50ml two components auto mixing applicator
10654050 - 400ml two components auto mixing applicator
10654001 - 50ml two components auto mixer
10654002 - 400ml two components auto mixer